Product ID:3M BRAND EC-1648 B STRUCTURAL (SEE SUPP)
MSDS Date:04/12/1989
FSC:8040
NIIN:00-835-4573
Kit Part:Y
MSDS Number: BNPRY

3M,ADHESIVES,COATINGS AND SEALERS

3M,GENERAL OFFICES,3M CENTER
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 04963

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

TOTAL

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0.4-0.8%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TOTAL DUST

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 1-10%

OSHA PEL 15 MG/M3 TOTAL DUST

ACGIH TLV: 10 MG/M3

CLAY

CAS: 68953-58-2

RTECS: UZ2996400

Fraction By Weight: 1-10%

OSHA PEL N/K

ACGIH TLV: N/K

KAOLINITE

CAS: 1318-74-7

Fraction By Weight: 20-30%

OSHA PEL N/K

ACGIH TLV: N/K

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 70-80%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE:IRRIT ON DIRECT CONT.VAP FROM HEAT CURING &
DUST FROM MACHINING CURED PROD MAY CAUSE IRRIT.SKIN:PRLNG/RPTD CONT
MAY CAUSE IRRIT & ALLERGIC SKIN REACTION IN SOME PERSONS.INGEST:NOT
EXPECTED.INHAL:H EATED VAPORS FROM CURING OPERATIONS/DUST FROM
GRINDING/SANDING/CUTTING OPERATIONS ON CURED PROD MAY CAUSE RESP
IRRIT.
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES:FLUSH IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES.CALL A PHYSICIAN.SKIN:REMOVE CONTAMINATED CLOTHING.WASH
AFFECTED AREA WITH SOAP AND WATER.INGESTION:DO NOT INDUCE
VOMITING.CALL A PH YSICIAN.TREAT BASED ON THE
SYMPTOMS.INHALATION:REMOVE PERSON TO FRESH AIR.CALL A PHYSICIAN.

Extinguishing Media:CARBON DIOXIDE,FOAM,DRY CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTER SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE KNOWN.HAZ DECOMP PROD:CARBON
MONOXIDE,CARBON DIOXIDE AND SMOKE PARTICLES WHEN SUBJECTED TO HEAT
OR FLAME, WITH TRACE METALS IF EXPOSED TO FLAME.

Spill Release Procedures:VENTILATE THE AREA.OBSERVE PRECAUTIONS FROM
OTHER SECTIONS.COLLECT SPILLED MATERIAL.PLACE IN A US DOT-APPROVED
METAL CONTAINER AND SEAL.
Neutralizing Agent:N/K

Handling and Storage Precautions:PROD CONSISTS OF TWO PARTS.OBSERVE
PRECAUTION FOR EACH PART WHEN SEPARATE/MIXED.AVOID EYE/SKIN CONT &
BRTHG VAP DURING HEAT CURING.KEEP CONTR CLOSED.
Other Precautions:FOR INDUST/PROFESSIONAL USE.KEEP FROM CHILDREN.USE
ONLY W/ SUFF VENT.VENT CURING OVEN TO ATMOSPHERE/EMISSION CONTROL
DEVICE.DO NOT RECIRCULATE EMISSIONS INTO WORKROOM.AVOID EYE
CONT/BRTHG DUST FROM GR INDING/SANDING/CUTTING OF CURED PRODUCT.

Respiratory Protection:WEAR DUST MASK DURING GRINDING,SANDING OR
CUTTING OPERATIONS ON THE CURED PRODUCT.
Ventilation:USE ONLY IN AREAS WITH SUFFICIENT VENTILATION TO PREVENT
VAPOR BUILDUP.
Protective Gloves:WEAR IMPERVIOUS GLOVES TO PVNT CONTACT.
Eye Protection:CHEMICAL SAFETY GOGGLES TO PVNT CONTACT.
Other Protective Equipment:WEAR DUST MASK.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
PART NO:EPOXY ADHESIVES.WASTE DISP METH:IN A SANITARY LANDFILL.INCIN
UNCURED BULK PRODUCT AFTER MIXING WITH FLAMMABLE MATERIAL IN AN
INDUSTRIAL OR COMMERCIAL FACILITY.%VOLAT:0 BY WT.ROUTES OF ENTRY:SK
IN/INGEST/INHAL .

Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Spec Gravity:1.31 (WATER=1)
Solubility in Water:NIL
Appearance and Odor:WHITE,VISCOUS PASTE WITH AN EPOXY ODOR.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE & SMOKE
PARTICLES WHEN SUBJECTED TO HEAT OR FLAME WITH TRACE METALS IF
EXPOSED TO FLAME.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISP MUST BE IAW FED,STATE & LOC
REGS.COORDINATION W/ SUPPORTING INSTALLATION &/OR MACOM
ENVIRONMENTAL COORDINATION PRIOR TO DISP IS REC TO DETERMINE APPROP
DISP METH .MIX PART A WITH PART B.COM PLETELY CURE & DISPOSE OF
CURED PRODUCT(SEE SUPP)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.